Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. It is discrete, does not use LED indicators or key fobs and is hidden within the wiring of your vehicle.
The user can also deactivate the system for a short period of time by using Transport Mode when renting their vehicle. This guide will walk you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key cloning attacks, hacking attacks and relay attacks. The system is connected directly to the ECU of your vehicle and protected by a PIN code that you choose. It's inaccessible to thieves using diagnostic scanners or other modern methods, and is unable to be disabled through circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection with the ECU of your vehicle. Installers who are approved by Thatcham can assist you with the installation and programing of your Ghost system. They can also suggest a tracking system or alarm system to complete your vehicle's security package.
To avoid the accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. When the battery is disconnected, the installer can safely begin working. Basic hand tools are helpful to make precise connections, while a multimeter can be used to verify electrical values and safety. Cable ties and insulation tape are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model.
It is important to choose the right grounding spot that is free of dirt or paint during installation. Installers should also ensure that the immobiliser's wires CAN H and can L are connected to the proper ECU ports. The wires can be connected or soldered, depending on the model. A high-quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the client after the installation is completed. This permits mechanics or valet parking to use the vehicle without knowing the pin code. The customer has to press the service icon on the dashboard five times within 2 seconds. Once this is done the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's an excellent choice for anyone who frequently rents out their cars through platforms such as Turo. An immobiliser can cut down on insurance costs, since it lowers the chance of theft.
Getting Started
You can't go far wrong with an autowatch ignition device for those who want to safeguard your car from theft. It protects your vehicle from being started even when a criminal steals or copies the key. This is due to its sophisticated technology, which is designed to stop the engine from starting until the correct PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your car. This is the best security system that protects your most precious possessions and preserve its value when you want to sell it in the future.
Installing a ghost ignition is an easy process, however, it's important to follow the directions carefully to avoid issues with electricity and system malfunctions. First, you must locate and identify a constant 12V power source as well as an adequate grounding point on the chassis of your vehicle. Then, you can start connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a solid connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to prevent short circuits of electricity.
Once the wires are connected, you can plug in the battery and begin the engine to check whether the immobiliser works. Once you have verified that everything is functioning properly and you are satisfied, you can place the immobiliser in a safe location in the vehicle. Be sure to cover it in a secure manner to prevent a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a high-quality deterrent to car thieves. It is impervious to key cloning and hacking and cannot be disabled without the code. It is simple to use, and it can be set to a service valet setting so that your vehicle won't be activated if you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to deter theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. Ghost Immobiliser doesn't interfere with the factory settings of your vehicle unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals but instead uses CAN data for communication with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
To utilize the Ghost Immobiliser, simply turn on your car's ignition and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You can now start your vehicle and drive in a safe manner.
Once installed Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking, while protecting the value of your car's pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser when you need to give your vehicle to service or valet parking.
You'll need a constant power source (12V) as well as a grounding source to complete the installation of a Ghost immobiliser. Be sure that they are well-insulated and safe to touch. Cable ties are also recommended to secure the wires. This will reduce the chance of theft by thieves. Make sure you check the exact locations of these points to avoid mistakes, and mark them with the help of tape or a label. Examine all connections for signs they're getting worn out. Loose connections can lead to system malfunctions, so be sure they're securely in place and securely insulated. Finally, don't forget to test the Ghost Immobiliser after installation is completed. This will confirm that the unit functions correctly and that all connections and insulation are safe. If there are any issues, make certain to fix them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your car's ECU to prevent the motor from starting without authorization. Its cutting-edge technology protects your vehicle from hacking and key cloning along with other common methods used by thieves to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the best security for your car. The Ghost's unmatched features, combined with its discreet design makes it a sought-after choice for drivers who love cars and security-conscious drivers.
It is crucial to follow the steps of installation in order to ensure the complete integration of the Ghost Immobiliser. A good starting point is to look over the wiring diagram of your vehicle that will serve as a guideline to locate and connecting the required wires. ghost immobiliser 2 'll then need to identify the power and grounding sources. Once you've identified these, you'll be required to mark them so that they're easily identifiable when installing. It's important to use high-quality materials and tools. Basic hand tools can assist you in making precise connections. A multimeter will check electrical values, and also ensure security. Insulation tape and cable ties can help keep connections tidy and neat. Also, a user's guide will provide specific instructions specifically tailored to your Ghost model.
It is crucial to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This test will verify that the immobiliser works as intended and prevent unauthorised vehicle starts. This step should be done frequently as part of your regular vehicle inspections in order to ensure the system is working properly.
After the installation is completed Once the installation is complete, you can drive your vehicle with confidence. The Ghost will guard your car from potential car thieves. It will ensure that no one can escape with your car even if they don't have the correct PIN code. The Ghost can also be used with a Thatcham-approved tracker to identify any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle in the event of it being stolen.
The Ghost can be used in a variety of vehicles and is compatible with all major manufacturers. If you're looking to secure your vehicle with this innovative device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Registered installer which guarantees that we adhere to the strictest standards and procedures for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that installations are performed safely and properly.